IEC/CE Split Type AC DC Current Detector Leakage Current Sensor for Solar Inverter
Notes:Pins+Cable: Integrated with the above functions, serial port communication (UART) can be carried out, and the leakage current alarm value can be set autonomously, and can also output the switching control signal. The leakage current of AC and DC can be output alarm.
● mA Level Measurement, DC 6mA Fault Current 6mA, AC 30mA
● AC DC Leakage Data Readable
● Alarm Value Programmable, 3 alarm Outputs
● One-body Design, Pin & Cable Type Installation
● IEC/CE/TUV Certificate
● CE-EMC standard: EN 61000-6-3:2007+A1, EN IEC 61000-6-1:2019
● Specially used for solar inverter, sufficient protection
||DC current 2~15mA, AC current 3~100mA
||DC±0.2mA, AC±0.3mA @ 25℃
|3 Ways Output
||DC alarm, AC alarm, AC/DC alarm
|Operation Temperature Range
Cable & Pin Type
3.1. Cautions of smart sensor
(1) Current value- Please specify your measurement range as per your application, for example if you are going to use it for detecting and sensing mA level or high current range such as 500A/600A shall be first factor.
(2) AC,DC,or both AC&DC shall be the second factor. Now current sensor on the market usually are AC or DC type.But if you need both AC& DC you may need to use IVY brand- AC DC leakage sensor.
(3) Parameters-Please confirm what kind of parameters shall be measured or detected. For example our smart sensor with shunt can readout current, voltage,kWh, kVar, Cosφ, Hz, THF, current cycle, starting waveform.
(4) Communication-RS485,M-bus, UART serial port are optional, if you have more requirements we can also develop for you.
(5) Installation Method, after making above decision you may also need to confirm the output terminal type, for example we have shunt / terminal / pillar / pins/ cable etc.
(6) As there are many models of smart electrical sensor, plz refer to the detailed specification and use it as per the instruction.
4.Why Choose Us
Q1: What kind of product and service do you have?
We provide all kinds of electronics including power relay, latching relay, change-over switch, current transformer, shunt, smart sensor, communication & power supply module, transformer etc.
The manufacturer of meter instrument, electrical device, EV charger, medical equipment can find one step solution here. Individual buyer,distributor or (sole/ designated) agents are also welcomed by us.
Q2: Are you are factory or trading company?
We are the manufacturer,designer and sales company. Our own factory was located in Tongxiang city of Zhejiang province.
For our history plz click About us or watch IVY factory video on Youtube.
Q3: Whether the price will change greatly?
To business customers, we mark price can be negotiated here as huge demand.
Usually we will not change the prices unless some force majeure such as trade war, exchange rate change greatly etc.
Q4: Can you offer customized solution, how should I get a quotation?
Yes!We can offer customized products especially when we supply EV accessories and meter accessories. To get a quoation plz kindly offer your basic company info for registration and offer your drawing.
It usually takes 12 hours to 48 hours to filnish the design and drawing (If complicated then plz refer to pracatical situation).
Q5: How do you handle the quality problems?
We are proud of our quality! If any accidents on quality, we have before-sales, in-sales and after-sales service. And every customer will have your own sales expert and technical support.